Tuesday, April 12, 2011

Cutting Stock Springs for a lower ride

this is an example of 2.5 coils cut in the front and 3.5 cut in the rear:


don't use an OXY welder to cut the springs, use a 1mm cut off wheel on an angle grinder, if you want a 2" drop cut about 1 coil off your spring...notice the effect of wheel size on the overall stance and profile...13" vs. 16" wheels..



1 comment:

  1. Good looking E21 posted. ;)

    http://farm6.static.flickr.com/5227/5611600742_2a6da15a7f_b.jpg

    ReplyDelete