4x100 15" WEDS Bavaria Wheel

4x100 15" WEDS Bavaria Wheel

7 Series Wheel Weds Bavaria 1 18x9.5 2 piece

This is a rare staggered 15" by 6.5" / 7" set of WEDS "Bavaria" 2 piece rims. Not sure if they were made in the 70s or 80s? I bought these for my e21 restoration project which is a ways from done so I don't need these at the moment. I am in a bit of a financial crunch so I need to sell these fast. These rims have been restored and never mounted since I bought them. The powder coated centers and hardware are flawless and the polished aluminum lips are mirror perfect. They have no curb damage or pitting. All the center caps are included with new bmw roundels. I priced these to sell so if you know the rarity of these rims you'll know this is a steal, my loss is your gain. These will fit the BMW 2002, e21 and e30 models, e30s would need to be flared though. There's probably more vehicles that will fit this offset, not aware of any myself.  Buyers are responsible for determining the fitment of these rims to their vehicle, all dimensions are provided below.

Dimensions:

Fronts:
Rim Diameter-(15")
Rim Width-(6.5")
Overall Rim width-(190mm)
Back Spacing-(110mm)
Offset-(+15mm)
Hub bore-(57.1mm)

Rears:
Rim Diameter-(15")
Rim Width-(7")
Overall Rim width-(205mm)
Back Spacing-(110mm)
Offset-(+7.5mm)

Hub bore-(57.1mm)

They sold for Buy it Now on ebay...i missed the opportunity...$1500.00

Enkei 2 piece 15" 4x100 et 10-20

jrcook: "whether or not they fit will depend on the profile of the inner wheel lip. Even if it "fits", make sure the tie rod dust boot isn't rubbing the lip as you'll wear through it and junk a rod end.

BMP sells cheap 5 and 8mm spacers but you'll need longer wheel bolts (or convert to lug studs). 8mm would be ideal to set your offset right at 12mm.

Motorsport tech can make custom hub centric spacers in any width, but you'll spend $200 just on spacers (that's what I'm running)."


IRELAND ENGINEERING!!!

www.bmw2002.com

They sell a 3mm hubcentric spacer for about $35 a pair. I've used these with both sets of my wheels that have 20mm offset.

16x9.5 et28 3-piece Epsilon Southern Way wheels with 5x4.75 pcd (5x120.7mm, but many people have run these as 5x120 with no problems).

These are 3-piece forged aluminum wheels, very lightweight

 16x9.5 et28 3-piece Epsilon Southern Way wheels
with 5x4.75 pcd (5x120.7mm, but many people have run these as 5x120 with no problems).

Black Hartge Wheels

Source: http://www.felgen-garage.de/

weber dual carb DCOE throttle adjuestment

Weber DCOE dual carb throttle adjuestment

european headlight grill vs american headlight grill

E30 M3 S14 Exhaust Manifold

E30 M3 S14 Exhaust Manifold

E30 M3 Header with Jet Hot Ceramic Coating

You are bidding on a very good used set of S14 headers (no cracks or any damage) that I sent to Jet Hot for 1300 Sterling high luster coating.  The coating covers both the inside and outside of the header tubes and is known as the one of the best high-tech coating in the business.  For more info, see:  http://www.jet-hot.com/headercoatings.html

Plans changed and I am unloading this beautiful piece.  It has not been installed since the treatment.

...stance....

Love the stance, love the contrasting wheels with black and chrome rims

california VIN: 5400635

California VIN: 5400635

late model 323i trailing arm disc brake disassembly

The pinned castle nut that was unimaginably difficult to remove with heat and a 4 ft cheater pipe on a 12 point socket

Notice the castle nut has been dressed with a file revealing the naive pipe wrench attempts before taking more drastic measures

The interior of the emergency brake mechanisms

Disc looks great, no scars, grooves, or warpage (re-useable!)

The opposite side

No issues, just needs cleaned

sub-frame rebuild and toe & camber adjustment welds

With Toe & Camber Adjustments Welded on (Outside)

Toe & Camber Welded on (Inside)

The Concentric Adjustment on the bolt side of the adjustment BMW P/N:

compare the 'new' ireland engineering adjustment bracket compared to the smooth ones that i installed...some say once the camber is established the concentric disc should be tac welded to hold it in place

The Concentric Adjustment on the nut side of the adjustment

Bracket that allows the trailing arm fastener to slide for the toe and camber adjustment required for cars that have been lowered

This is an original dinan camber & toe adjustment

Original dinan

This is the eccentric bolt sold by Ireland Engineering, it is actually a BMW E39 5-Series part: 
p/n 33 32 1 092 310 bolt  (M12 X 1.5 X 98mm)  p/n 33-32-1-093-456 washe


r

droll....naked m10/s14 engine

API...

engine install....

To Do List . . .

P/N#: 517.1185.2737
P/N#: 517.1185.2738

Maxmillian Mobile Tradition
 $165.00 Re-Manufactured

Maxmillian Mobile Tradition
 Stabilizer rubber mounting            D=16MM        P/N#: 33551103492                    $11.60
Stabilizer, rear            D=16MM         P/N#:

Maxmillian Mobile Tradition
 S

320i chassis...

seat

Product Information

Pricing (per seat)

Cloth: $349.00
Suede: $399.00
Black Leather: $575.00
Leather/Suede: $575.00

source: http://www.corbeau.com/products/reclining_seats/gts_ii/

Flywheel Lightened?? (part 4)

bmw m10 hp

Korman Stage 2 2.0 liter engines

150 HP, revs to 7000 RPM. Dual Weber 40 DCOE's, Korman intake manifold, Stage 2 porting and polishing, high compression pistons, lightened rods, Korman K300 cam, dual valve springs, chrome alloy retainers, Performance rocker arms, mechanical advance distributor, Korman-Stahl headers. Also available with Schrick 292 cam, (160 HP), or Weber 32/36 carb (140 HP).

Call with your specific application for pricing.