Ok, so it has taken me what seems like forever to find an get these gas lines for the top vent tubes but now that I have them installed the left hand tank has the line fastened on, and the tank is fastened with only hand tight bolts. Because this is a '76 build date it features separate tank connected with (1.5 SAE) hose, that hose lists for $16.00/ft. That is in place as well...I need to have some work done to the in-tank suction devise before its installed and the right side tank lifted into place...
...the journey of a '77 bmw 320i from its home in california through a mild "frame on" restoration in the midwest...
Showing posts with label fuel sender. Show all posts
Showing posts with label fuel sender. Show all posts
Wednesday, June 27, 2012
Saturday, May 26, 2012
These are my before pics...I looked
for an in tank fuel sender at the pic and pull but theirs were worse than mine...
After removing the 2 tanks i had tanks sand blasted and I primed them...I've now applied POR-15 to both tanks...
for an in tank fuel sender at the pic and pull but theirs were worse than mine...
After removing the 2 tanks i had tanks sand blasted and I primed them...I've now applied POR-15 to both tanks...
![]() |
| this is a close up of the fuel sender in the condition i found it...caked on dirt, grease, and grim...after pulling the access cover in the back of the car under the back seat... |
![]() |
| the in-tank fuel sender...corrosion... |
![]() |
| the hard lines... |
![]() |
| electrical to the in-tank |
![]() |
| beginning the clean up process |
![]() |
| opps |
![]() |
| freshly sandblaster and freshly primered |
![]() |
| in the truck at the sandblaster's |
![]() |
| side 2 |
Labels:
fuel,
fuel pump,
fuel sender,
fuel system wiring,
in-tank fuel pump
Wednesday, May 9, 2012
gas tanks/lines/fuel system rebuild
...the wiring to the in tank fuel sender, with most of the original stock vent hoses...
wiring colors and plugs...i set my phone down under the car with me and when i split the tanks joining rubber hose my 'bucket' was far to small and i created somewhat of an environmental mess on the shop floor...my new iPhone was one of the several things that got soaked...
my home remedy for an environmental messes...
...before...
before....
fuel hardlines...before...
fuel tanks loaded into the back of my pickup fresh from the sandblaster's
this is the top of the in tank fuel pump and sender with the fuel sender held into place with 4 separate nuts and washers...
this is the fuel pump and sender after a through cleaning
notice the micro-fiber filter and the foot of the pump
primered tank 1
primered tank 2
Labels:
fuel sender,
fuel system wiring,
gas tank,
in-tank fuel pump
Subscribe to:
Posts (Atom)














































