  |
4x100 15" WEDS Bavaria Wheel
7 Series Wheel Weds Bavaria 1 18x9.5 2 piece
This is a rare staggered 15" by 6.5" / 7" set of WEDS "Bavaria" 2 piece rims. Not sure if they were made in the 70s or 80s? I bought these for my e21 restoration project which is a ways from done so I don't need these at the moment. I am in a bit of a financial crunch so I need to sell these fast. These rims have been restored and never mounted since I bought them. The powder coated centers and hardware are flawless and the polished aluminum lips are mirror perfect. They have no curb damage or pitting. All the center caps are included with new bmw roundels. I priced these to sell so if you know the rarity of these rims you'll know this is a steal, my loss is your gain. These will fit the BMW 2002, e21 and e30 models, e30s would need to be flared though. There's probably more vehicles that will fit this offset, not aware of any myself. Buyers are responsible for determining the fitment of these rims to their vehicle, all dimensions are provided below.
|
Fronts:
Rim Diameter-(15")
Rim Width-(6.5")
Overall Rim width-(190mm)
Back Spacing-(110mm)
Offset-(+15mm)
Hub bore-(57.1mm)
Rears:
Rim Diameter-(15")
Rim Width-(7")
Overall Rim width-(205mm)
Back Spacing-(110mm)
Offset-(+7.5mm)
Hub bore-(57.1mm)
They sold for Buy it Now on ebay...i missed the opportunity...$1500.00
 |
| Enkei 2 piece 15" 4x100 et 10-20 |
jrcook: "whether or not they fit will depend on the profile of the inner wheel lip. Even if it "fits", make sure the tie rod dust boot isn't rubbing the lip as you'll wear through it and junk a rod end.
BMP sells cheap 5 and 8mm spacers but you'll need longer wheel bolts (or convert to lug studs). 8mm would be ideal to set your offset right at 12mm.
Motorsport tech can make custom hub centric spacers in any width, but you'll spend $200 just on spacers (that's what I'm running)."
IRELAND ENGINEERING!!!
www.bmw2002.com
They sell a 3mm hubcentric spacer for about $35 a pair. I've used these with both sets of my wheels that have 20mm offset.
16x9.5 et28 3-piece Epsilon Southern Way wheels with 5x4.75 pcd
(5x120.7mm, but many people have run these as 5x120 with no problems).
These are 3-piece forged aluminum wheels, very lightweight
16x9.5 et28 3-piece Epsilon Southern Way wheels
with 5x4.75 pcd (5x120.7mm, but many people have run these as 5x120 with no problems).
with 5x4.75 pcd (5x120.7mm, but many people have run these as 5x120 with no problems).
No comments:
Post a Comment